[vc_row][vc_column][vc_column_text]<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Name of mixture<\/th>\n Core component<\/th>\n Chemical composition, %<\/th>\n Density after firing at 800\u02daC, ^{g\/cm3<\/sup><\/th>\n} Compressive strength, ^{N\/mm2<\/sup><\/th>\n} Thermal conductivity at an average temperature of 500\u02daC, W\/m*K<\/th>\n Application temperature, \u02daC<\/th>\n<\/tr>\n
Al_{2<\/sub>O_{3<\/sub><\/th>\n}} SiO_{2<\/sub><\/th>\n} Fe_{2<\/sub>O_{3<\/sub><\/th>\n}} CaO<\/th>\n 3 days after molding<\/th>\n after firing at 800\u02daC<\/th>\n<\/tr>\n<\/thead>\n
Aligan 1.0-1350<\/td>\n lightweight fireclay<\/td>\n 37<\/td>\n 42<\/td>\n 2<\/td>\n 15<\/td>\n 1.0<\/td>\n 6<\/td>\n 4<\/td>\n 0.3<\/td>\n 1350<\/td>\n<\/tr>\n
Aligan 1.2-1350<\/td>\n lightweight fireclay<\/td>\n 39<\/td>\n 41<\/td>\n 2<\/td>\n 14<\/td>\n 1.2<\/td>\n 8<\/td>\n 7<\/td>\n 0.4<\/td>\n 1350<\/td>\n<\/tr>\n
Aligan 1.4-1350<\/td>\n lightweight fireclay<\/td>\n 40<\/td>\n 42<\/td>\n 2<\/td>\n 13<\/td>\n 1.4<\/td>\n 12<\/td>\n 13<\/td>\n 0.5<\/td>\n 1350<\/td>\n<\/tr>\n
Aligan 1.6-1350<\/td>\n lightweight fireclay<\/td>\n 41<\/td>\n 41<\/td>\n 2<\/td>\n 13<\/td>\n 1.6<\/td>\n 20<\/td>\n 15<\/td>\n 0.6<\/td>\n 1350<\/td>\n<\/tr>\n
Aligan 1.6-1350N<\/td>\n lightweight fireclay<\/td>\n 44<\/td>\n 35<\/td>\n 5<\/td>\n 13<\/td>\n 1.6<\/td>\n 50<\/td>\n 35<\/td>\n 0.6<\/td>\n 1350<\/td>\n<\/tr>\n
Aligan 1.6-1250\/20<\/td>\n lightweight fireclay<\/td>\n 30<\/td>\n 48<\/td>\n 2<\/td>\n 17<\/td>\n 1.6<\/td>\n 20<\/td>\n 15<\/td>\n 0.6<\/td>\n 1250<\/td>\n<\/tr>\n
Aligan 25\/4<\/td>\n fireclay<\/td>\n 27<\/td>\n 61<\/td>\n 1.5<\/td>\n 4<\/td>\n 1.9<\/td>\n 20<\/td>\n 40<\/td>\n 0.9<\/td>\n 1200<\/td>\n<\/tr>\n
Aligan 37\/0<\/td>\n fireclay<\/td>\n 40<\/td>\n 55<\/td>\n 2<\/td>\n 0.2<\/td>\n 2.0<\/td>\n 3<\/td>\n 12<\/td>\n 1.0<\/td>\n 1500<\/td>\n<\/tr>\n
Aligan 37-40<\/td>\n fireclay<\/td>\n 39<\/td>\n 40<\/td>\n 7<\/td>\n 11<\/td>\n 1.85<\/td>\n 30<\/td>\n 40<\/td>\n 0.8<\/td>\n 1300<\/td>\n<\/tr>\n
Aligan 30-40\/20<\/td>\n fireclay<\/td>\n 28<\/td>\n 45<\/td>\n 3<\/td>\n 20<\/td>\n 1.85<\/td>\n 30<\/td>\n 30<\/td>\n 0.8<\/td>\n 1150<\/td>\n<\/tr>\n
Aligan 37-50<\/td>\n fireclay<\/td>\n 42<\/td>\n 41<\/td>\n 2<\/td>\n 11<\/td>\n 1.85<\/td>\n 30<\/td>\n 40<\/td>\n 0.8<\/td>\n 1400<\/td>\n<\/tr>\n
Aligan 37-50K<\/td>\n fireclay<\/td>\n 38<\/td>\n 43<\/td>\n 2<\/td>\n 12<\/td>\n 1.8<\/td>\n 30<\/td>\n 40<\/td>\n 0.8<\/td>\n 1200<\/td>\n<\/tr>\n
Aligan 45\/5<\/td>\n fireclay<\/td>\n 40<\/td>\n 50<\/td>\n 1.5<\/td>\n 5<\/td>\n 2.0<\/td>\n 50<\/td>\n 40<\/td>\n 1.0<\/td>\n 1400<\/td>\n<\/tr>\n
Aligan 50\/7<\/td>\n fireclay<\/td>\n 47<\/td>\n 42<\/td>\n 1.5<\/td>\n 7<\/td>\n 2.0<\/td>\n 40<\/td>\n 60<\/td>\n 1.0<\/td>\n 1450<\/td>\n<\/tr>\n
Aligan 50\/3<\/td>\n fireclay<\/td>\n 48<\/td>\n 45<\/td>\n 1<\/td>\n 3<\/td>\n 2.15<\/td>\n 25<\/td>\n 70<\/td>\n 1.2<\/td>\n 1500<\/td>\n<\/tr>\n
Aligan 50\/3A<\/td>\n fireclay<\/td>\n 53<\/td>\n 41<\/td>\n 0.8<\/td>\n 3<\/td>\n 2.25<\/td>\n 30<\/td>\n 100<\/td>\n 1.3<\/td>\n 1500<\/td>\n<\/tr>\n
Aligan 50\/1.5<\/td>\n fireclay<\/td>\n 52<\/td>\n 44<\/td>\n 1<\/td>\n 1.5<\/td>\n 2.2<\/td>\n 10<\/td>\n 40<\/td>\n 1.2<\/td>\n 1600<\/td>\n<\/tr>\n
Aligan 60\/0<\/td>\n bauxite<\/td>\n 66<\/td>\n 28<\/td>\n 1.8<\/td>\n 0.2<\/td>\n 2.2<\/td>\n 5<\/td>\n 15<\/td>\n 1.2<\/td>\n 1550<\/td>\n<\/tr>\n
Aligan 60\/2.5<\/td>\n andalusite<\/td>\n 58<\/td>\n 38<\/td>\n 0.7<\/td>\n 2.4<\/td>\n 2.3<\/td>\n 15<\/td>\n 50<\/td>\n 1.4<\/td>\n 1650<\/td>\n<\/tr>\n
Aligan 69\/1.5<\/td>\n mullite<\/td>\n 63<\/td>\n 32<\/td>\n 1<\/td>\n 1.5<\/td>\n 2.4<\/td>\n 15<\/td>\n 50<\/td>\n 1.5<\/td>\n 1650<\/td>\n<\/tr>\n
Aligan 69\/2.5<\/td>\n mullite<\/td>\n 65<\/td>\n 30<\/td>\n 1<\/td>\n 2.5<\/td>\n 2.4<\/td>\n 15<\/td>\n 50<\/td>\n 1.5<\/td>\n 1650<\/td>\n<\/tr>\n
Aligan 80\/0<\/td>\n bauxite<\/td>\n 80<\/td>\n 16<\/td>\n 1.5<\/td>\n 0.3<\/td>\n 2.5<\/td>\n 5<\/td>\n 15<\/td>\n 1.5<\/td>\n 1550<\/td>\n<\/tr>\n
Aligan 80\/2<\/td>\n bauxite<\/td>\n 82<\/td>\n 13<\/td>\n 0.9<\/td>\n 1.8<\/td>\n 2.6<\/td>\n 30<\/td>\n 50<\/td>\n 1.8<\/td>\n 1650<\/td>\n<\/tr>\n
Aligan 80\/3A<\/td>\n bauxite<\/td>\n 78<\/td>\n 15<\/td>\n 1<\/td>\n 3.5<\/td>\n 2.6<\/td>\n 30<\/td>\n 120<\/td>\n 1.9<\/td>\n 1450<\/td>\n<\/tr>\n
Aligan 83<\/td>\n corundum<\/td>\n 86<\/td>\n 9<\/td>\n 0.2<\/td>\n 3<\/td>\n 2.65<\/td>\n 30<\/td>\n 120<\/td>\n 2.0<\/td>\n 1400<\/td>\n<\/tr>\n
Aligan 83\/0<\/td>\n corundum<\/td>\n 87<\/td>\n 12<\/td>\n 0.3<\/td>\n 0.1<\/td>\n 2.7<\/td>\n 5<\/td>\n 20<\/td>\n 2.1<\/td>\n 1650<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_column_text]<\/p>\n\n\n\n\n\n\n\n\n
These values may vary depending on the characteristics of the raw materials and are not guaranteed.<\/th>\n<\/tr>\n
ALIGAN 1.0-1350
\nALIGAN 1.2-1350
\nALIGAN 1.4-1350
\nALIGAN 1.6-1350
\nALIGAN 1.6-1350N
\nALIGAN 1.6-1250\/20<\/td>\n Thermal insulating concretes characterized by density, thermal conductivity and strength, intended for application by shotcrete. They have low fluidity, set and harden quickly. They are not recommended for pouring, in which case similar ALAX mixtures should be used.<\/td>\n<\/tr>\n
ALIGAN 25\/4<\/td>\n A shotcrete mix with reduced _{Al2O3<\/sub> content, with high resistance to alkalis, chlorides and sulphates, for use in low-temperature zones of thermal units in the cement and power industries.<\/td>\n<\/tr>\n}
ALIGAN 37-40
\nALIGAN 37-50.
\nALIGAN 37-50K
\nALIGAN 37-40\/20
\nALIGAN 45\/5
\nALIGAN 50\/7<\/td>\n High cement content shotcrete with increased strength and abrasion resistance compared to similar ALCOR concretes. They are noticeably inferior to low-cement mixtures in terms of abrasion resistance, but are significantly superior to them in terms of thermal insulation properties. Characterized by low rebound and good adhesion, they set and harden quickly. They have a “viscous” consistency suitable for shotcrete, but when excess water is added they can be poured by pouring with intense vibration. When using the pour-in-place method, be aware that these concretes set quickly. In this case, the use of retarders is recommended.
\nALIGAN 37-50 and ALIGAN 50\/7 due to combination of low thermal conductivity and rather high abrasion resistance became basic materials for single-layer lining of reactors and regenerators of catalytic cracking units with dusty catalyst.
\nALIGAN 37-50K mix has increased acid resistance.<\/td>\n<\/tr>\n
ALIGAN 50\/3
\nALIGAN 50\/3A
\nALIGAN 50\/1.5
\nALIGAN 60\/2.5
\nALIGAN 69\/1.5
\nALIGAN 69\/2.5
\nALIGAN 80\/2
\nALIGAN 80\/3A
\nALIGAN 83<\/td>\n Low cement shotcrete mixes with low rebound and good adhesion, set and harden quickly. They are highly fire resistant. Strengthened by heat. When retarders are added, can be poured by pouring.
\nALIGAN 50\/3, ALIGAN 50\/3A, ALIGAN 80\/3A, ALIGAN 83 have high strength and abrasion resistance, only slightly inferior to the corresponding deflocculated poured concrete.
\nALIGAN 50\/1,5, ALIGAN 60\/2,5, ALIGAN 69\/2,5, ALIGAN 80\/2 are high-temperature shotcrete mixtures with application temperature of 1600\u00b0C and higher.
\nMixtures with idex “A” may be operated in a reducing atmosphere.<\/td>\n<\/tr>\n
ALIGAN 37\/0
\nALIGAN 60\/0
\nALIGAN 80\/0
\nALIGAN 83\/0<\/td>\n Ceramic-bonded shotcrete mixes do not contain aluminatcalcium cement. After application they have low mechanical strength, but when heated they harden due to sintering. They set slowly, so they can be applied by hand. They’re not suitable for pouring.
\nLinings made from these mixtures can be dried on an accelerated schedule.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_column_text]\n
\n
<\/p>
<\/ul><\/div>\n
\n
\n<\/fieldset>\n
Please leave your contact details, we will contact you as soon as possible!\n<\/p>\n
<\/span>
\n<\/span>
\n<\/span>
\n<\/span>
\n<\/textarea><\/span><br \/>\n<input class=\"wpcf7-form-control wpcf7-submit has-spinner\" type=\"submit\" value=\"Submit\" \/>\n<\/p><p style=\"display: none !important;\" class=\"akismet-fields-container\" data-prefix=\"_wpcf7_ak_\"><label>Δ<textarea name=\"_wpcf7_ak_hp_textarea\" cols=\"45\" rows=\"8\" maxlength=\"100\"><\/textarea><\/label><input type=\"hidden\" id=\"ak_js_1\" name=\"_wpcf7_ak_js\" value=\"63\"\/><script>\ndocument.getElementById( \"ak_js_1\" ).setAttribute( \"value\", ( new Date() ).getTime() );\n<\/script>\n<\/p><div class=\"wpcf7-response-output\" aria-hidden=\"true\"><\/div>\n<\/form>\n<\/div>\n[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_wp_custommenu nav_menu=”81″][\/vc_column][\/vc_row]<\/p>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>[vc_row][vc_column][vc_column_text] Name of mixture Core component Chemical composition, % Density after firing at 800\u02daC, g\/cm3 Compressive strength, N\/mm2 Thermal conductivity at an average […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":3907,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-3840","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/pages\/3840","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/comments?post=3840"}],"version-history":[{"count":7,"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/pages\/3840\/revisions"}],"predecessor-version":[{"id":3854,"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/pages\/3840\/revisions\/3854"}],"up":[{"embeddable":true,"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/pages\/3907"}],"wp:attachment":[{"href":"https:\/\/demomark.ee\/en\/wp-json\/wp\/v2\/media?parent=3840"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}